产品展示

技术创新,质量第一,用户至上

偏光片模切机
偏光片模切机
视频展示:
产品详情:

一、适用范围 
 Application  

本机适用于电子业、PET,PP,PVC、偏光片,粘胶、绝缘材料、屏蔽材料、3M.SONY,NITTO,TEST,PORON(橡胶)等特殊胶带成型,以及LED.LCD、背光源、反光源(RW-100,RW-50,RF-188)散光膜(日本王子:90,75,60D204.D105、DB642.CH19)、防静电保护膜、黑白双面胶、不透光铝箔、增光膜、镭射纸等的多次复合综合加工。
 
This machine is suitable for electronics industry,PET,PP,PVC,polarizer,adhesive,insulation material,shielding material,3M,SONY,NITTO.
 
TEST.PORON(rubber)and other special tape molding,as well as multiple composite processing of LED.LCD,backlight,anti-light source(RW-100,RW-50,RF-188)astigmatism film(Japan Prince:90,75,60D204,D105,DB642,CH19),anti-static protective film,black and white ouble-sided adhesive tape,opaque aluminum foil,brightness enhancement film,laser paper and etc.

二、设备特点   Features     

1本机精度高、噪音小、速度快、跳距准。是电子行业中理想的非金属材料冲型设备。
 
2采用先进的电脑数码拉带系统,触摸屏操作PLC程序控制:1送料长度可根据客户需求自行设置;2具有油压电脑自动监控系统,当油压过高或过低时机器自动报警,确保机器在正常的油压范围内工作;3伺服送料长度与机器模切速度进行自动设置,无需调节。
 
3整机设计:(1材料不接地;不易受潮;不受污染;2模切行程170mm,压力稳定;3具有精度高、噪音小、跳距准、等优点。
 
4放料部分:(1放料配备独立电机、可正、反转;2自动张力控制器控制张力,操作方便;3放料部分采用自动感应放料,使材料不接地,裁切部分:1可安装木板刀模;2装有安 全光幕保护装置,确保操作人员安 全;3刀模角度可任意调节,对位更加方便、快捷。)
 
5送料系统:1采用进口伺服拉料,性能稳定,送料精 确;2进口丝杠、滑轨,精度高,使用寿命长,不易磨损,且不受温度影响,稳定性更强

 

This machine has features of high precision,low noise,fast speed and accurate hop distance.It is the most ideal non-metallic material punching equipment in the electronics industry.
 
Advanced computer digital drawing system and touch screen operation PLC program control are adopted in this machine:feeding length can be set according to customer's needs:with hydraulic computer automatic monitoring system,the machine automatically alarms to ensure the machine workin within the nomal oil.
 
pressure range when the oil pressure is too high or too low;servo feed length and machine mold cutting speed are automatically set without adjustment.
 
Machine design:material is not grounded,not easy to get wet or not contaminated;170MM mold cutting stroke,stable pressure;high precision,low noise,standard hop distance and so on.
 
Loading part:loading material is equipped with independent motor which can be forward and reverse;automatic tension contraller controls tension,which is eas to operate;loading part adopts automatic induction loading,so that the material is not grounded Cutting part:can install wooden knife mold;equipped with safety light curtain protection device to ensure the safety of operators;cutter angle can be adjsted frely.
 
and the alignment is more convenient and quick.
 
Feeding system:imported servo pull material,stable performance,accurate feedina;imported screw,slide rail,nigh precision,lona service life,not easy to wear,not affected by temperature and strong stability
 
 

本系列相关产品